- Show quoted text -
Supplies:
2’ x 4’ piece of scrap wood
5/8 inch drill bit
electric drill or drill press
Gorilla Glue
sandpaper – varying grits
5 markers
Mini Clothespins
Primer
Spray Paint
Letters or Embellishment of your choice
Optional:
Knobs for feet
Mod Podge
Paper Scraps
1. Cut a piece of 2’ x 4’ to 10”. I just used a miter box and hand saw. I sanded it smooth on all sides starting with 60 grit and ending with 120 grit. 2. Position your markers where you want them and mark the spot where you will drill. 3. Get your drill press ready or an electric hand drill and a 5/8” drill bit. Drill the holes about 1” deep.
4. Take your mini clothespins and put a little Gorilla Glue on them. This stuff expands so do not use a lot. Take 60 grit sandpaper and roughen up your marker top a little. Press the clothespin in place and let them dry overnight. 5. Spray primer your board and then spray paint it the color of your choice. I added knobs as feet just for fun. 6. At this point you can embellish anyway you wish. I decided to break out my Mod Podge and adhere paper to the four sides of the board. I sanded the edges of the paper and then Mod Podged over the top of the paper to seal it.
No comments:
Post a Comment
Thanks for all your sweet comments, they make my day!! :) Make sure that in your profile you have selected *show e-mail* so that I can get back to you with questions. Or shoot me an e-mail for the quickest response. Thank you!!